CNC Swiss Machine Operator/Programmer
Landisville, PA Landisville, PA Full-time Full-time $27 - $34 an hour $27 - $34 an hour 3 days ago 3 days ago 3 days ago Job Details Description Bearon is looking for a CNC Swiss Machine Operator/Programmer to join our team in Landisville, PA.
This person will setup, operate, and program our 5 CNC Swiss Machines.
Must be able to perform the following functions:
work well with others in the Swiss Department; operate and program machines as required; maintain a clean and safe work area; must be open to perform any other duties as required; must be able to follow all processes and procedures related to machine operations and inspections.
Should have a working knowledge of 5s and other Lean principles.
Responsibilities:
Set up and operate CNC Swiss Machines Verify positioning of cutting tools by using gauges or other instruments.
Install and adjust tooling, pick off collets and stops on the machine.
Work safely around equipment and co-workers Daily maintenance activities Flexibility with rotating assignments Work as part of a team Label finished product and keep track of material used in production Keep area clean and organized COMPETENCIES:
Possess a mechanical aptitude and great organizational skills Great attitude, attendance, and self-starter Ability to use hand tools and read blueprints Ability to use measuring tools and shop mathematics Ability to stand for 8 hours Ability to lift up to 70 pounds over the course of a shift The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law.
To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements.
The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.
g.
, in response to a lawful subpoena; mandatory tax reporting; etc.
) Qualifications Behaviors Preferred Dedicated:
Devoted to a task or purpose with loyalty or integrity Detail Oriented:
Capable of carrying out a given task with all details necessary to get the task done well Team Player:
Works well as a member of a group Loyal:
Shows firm and constant support to a cause Motivations Preferred Goal Completion:
Inspired to perform well by the completion of tasks Self-Starter:
Inspired to perform without outside help Growth Opportunities:
Inspired to perform well by the chance to take on more responsibility Education Preferred Technical/other training or better.
Experience Required 2-5 years:
Previous CNC Lathe Bar Machine experience preferred (Swistek, Citizen etc.
) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
41 CFR 60-1.
35(c) Job Type:
Full-time Pay:
$27.
00 - $34.
00 per hour COMPETENCIES:
.
Estimated Salary: $20 to $28 per hour based on qualifications.
This person will setup, operate, and program our 5 CNC Swiss Machines.
Must be able to perform the following functions:
work well with others in the Swiss Department; operate and program machines as required; maintain a clean and safe work area; must be open to perform any other duties as required; must be able to follow all processes and procedures related to machine operations and inspections.
Should have a working knowledge of 5s and other Lean principles.
Responsibilities:
Set up and operate CNC Swiss Machines Verify positioning of cutting tools by using gauges or other instruments.
Install and adjust tooling, pick off collets and stops on the machine.
Work safely around equipment and co-workers Daily maintenance activities Flexibility with rotating assignments Work as part of a team Label finished product and keep track of material used in production Keep area clean and organized COMPETENCIES:
Possess a mechanical aptitude and great organizational skills Great attitude, attendance, and self-starter Ability to use hand tools and read blueprints Ability to use measuring tools and shop mathematics Ability to stand for 8 hours Ability to lift up to 70 pounds over the course of a shift The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law.
To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements.
The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.
g.
, in response to a lawful subpoena; mandatory tax reporting; etc.
) Qualifications Behaviors Preferred Dedicated:
Devoted to a task or purpose with loyalty or integrity Detail Oriented:
Capable of carrying out a given task with all details necessary to get the task done well Team Player:
Works well as a member of a group Loyal:
Shows firm and constant support to a cause Motivations Preferred Goal Completion:
Inspired to perform well by the completion of tasks Self-Starter:
Inspired to perform without outside help Growth Opportunities:
Inspired to perform well by the chance to take on more responsibility Education Preferred Technical/other training or better.
Experience Required 2-5 years:
Previous CNC Lathe Bar Machine experience preferred (Swistek, Citizen etc.
) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
41 CFR 60-1.
35(c) Job Type:
Full-time Pay:
$27.
00 - $34.
00 per hour COMPETENCIES:
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
